Open a Microsoft
®
Windows
®
file browser and carry out the following:
• Navigate to C:\AlphaData_ADC12DJ3200_Demo\GUI Utility Version 1.0
• Launch “ILA Analyser”
• Set the Capture data Folder Path as
shows.
Figure 7-15. ILA Analyser
• Fill in the rest of the values
• With Dynamic Refresh selected, the analyzer will do continuous captures. Unselecting this box will only do a
one time capture. This should be selected.
Note
Use the Active Channel drop-down to explicitly select the iladata.csv file (even if it is displayed by
default). Otherwise, the tool may show error symbols on the rest of the fields (as it has not parsed
the file yet to map the fields to its internal parameters).
Alpha-Data ADC12DJ3200EVMCVAL Start-up Instructions
24
ADC12DJ3200EVMCVAL With Alpha Data Xilinx
®
Kintex Ultrascale Space
Development Kit
SLAU833A – MAY 2020 – REVISED OCTOBER 2020
Copyright © 2020 Texas Instruments Incorporated
