www.texas.dk
15
8. Information on identification.
This information is important for later identification of the machine when you need spare
parts. The identification plate is located near the engine. Write down the information on
this place in the box below.
9. Trouble shooting
Problem
Possible cause
Solution
The bolts in the auger are
broken
Replace
The funnel is blocked
Stop the engine and clean
The cables are to sleek
Adjust the cable
The machine does not clear
the snow
DefectiveV-belt
Replace
Cable too sleek
Tighten cable
The machine does not move
Defective V-belt
Replace
Heavy vibrations
Loose parts of defective au-
ger.
Immediately stop the engine
and tighten all bolts and nits.
Repair the auger.
The cable is adjusted incor-
rectly
Adjust
Difficult to change gear
Track system is iced up.
De-ice
For engine trouble contact your local dealer
