Texas Automation Products DES-32, Manual

Page: 7 / 23

6
Power Consumption
PLATEN SIZE WATTS AMPS
2” x 4” 600 5
3” x 5” 800 7
4” x 6” 880 7.3
5” x 6” 1680 14
3 ¼” x 5” Extended
Anvil
440 3.7
Connecting the Electrical Power Supply
Before connecting electrical power to the DES-32, push the DES-32’s toggle power switch down
to the “OFF” position. Plug the DES-32’s power cord into an appropriate power source, such as
a standard receptacle. The electrical power cord has a molded 15 amp plug.
Connecting Compressed Air
To connect the air supply to the DES-32, perform the following:

Remove the 1/8” male NPT pipe plug from the air line connector. The DES-32 includes
this plug during shipment to protect against contaminants entering the air system.

After removing the plug, connect the air supply to the DES-32’s 1/8” female NPT air line
connector.