32
2) Original spare parts
Only the following pairs of blades can be used on this
machine:
Art. no. 440547 (left blade) - 1 pcs.
Art. no. 440571 (right blade) - 1 pcs.
Always change both blades!
3) Remounting blades
Check that the concave part of the cushion disc (3)
presses against the blade.
Remount the shaft hubs (4), making sure that the keys
(5) are securely lodged in place.
4) Tightening the screws
1a = screw with right thread (tighten clockwise)
1b = screw with left thread (tighten anti-clockwise)
Tighten with a torque wrench calibrated to 40-45 Nm.
7.4.6 Replacing the belt
The belt replacement must be carried out at an
Authorized Service Center.
Replace the belts as soon as they show obvious
sign of wear!
ALWAYS USE GENUINE REPLACEMENT BELTS!
7. Specifications
Model: XC160-102HC
Engine: Loncin
LC1P92F-1
Rated power:
9.2 kW (452 cc)
Max. engine speed:
2800 min
-1
Engine oil capacity:
1.2 L
Fuel (gasoline) capacity: 7.5 L
Sound pressure level at
the operator (EN
836+A4):
L
pA
: 88.6 dB(A)
K
pA
: 3 dB(A)
Guaranteed sound
power level
(2000/14/EC):
L
wA
: 100 dB(A)
K
wA
: 0.58 dB(A)
Vibrations (EN 836+A4):
a
h
: 11.53 m/s
2
K
h
: 1.5 m/s
2
Blade:
Left: Art. no. 440547
Right: Art. no. 440571
Blade screw tightening
torque:
40-45 Nm
Battery:
12V / 18Ah
Cutting height:
30-90 mm
Cutting width:
102 cm
Front tires size:
15 x 6.00-6
Rear tires size:
18 x 8.50-8
Front tire pressure:
1.0 bar
Rear tire pressure:
0.8 bar
Forward speed:
0 - 8.8 km/h
Reverse speed:
0 - 3.8 km/h
Grass catcher capacity:
270 L
Machine dimensions
See Fig. 32
8. Warranty terms and conditions
The warranty period is 2 years for private end users in
EU countries.
Products sold for commercial use, only have a warranty
period of 1 year.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are
NOT covered by the warranty.
Wearing parts, which are NOT covered for more
than 12 months:
•
Battery: If the battery is not stored correct (frost-
free and recharged every 3 months), the durability
is only guaranteed for 6 months.
•
Tires
•
Blades
•
Cables
•
Belts
•
Tires
•
Fuses
•
Switches
•
Membranes/gaskets/fuel
hoses
•
Spark
plugs
•
Engine liquids (oil, gasoline)
•
Filters
•
Light
bulbs
If you start the engine without adding oil, it will be
damaged and cannot be repaired and therefore not
covered by the warranty.
The warranty does NOT cover damages/faults
caused by:
•
Lack of service and maintenance
•
Structural
changes
•
Exposure to unusual external conditions
•
Damages to the bodywork, deck, handles, panels
etc.
•
If the machine has been improperly used or
overloaded
•
Wrong use of oil, gasoline or other liquid types,
which are not recommended in this user manual
•
Bad or dirty gasoline, which results in
contamination of the fuel system
•
Use of unoriginal spare parts.
•
Other conditions where Texas cannot be held
responsible.
Whether a case is a warranty claim or not is
determined in each case by an authorized service
center.
Your receipt is your warranty note, why it should
always be kept safe.
REMEMBER:
The purchase of spare parts as well as
any request for warranty repair, art. number (e.g.
900631XX), year and serial number should always be
informed. It can be found on the CE-label which is
placed near the battery under the seat.
* We reserve the right to change the conditions and
accept no liability for any misprints
Summary of Contents for XC160-102HC
