23
Maintain and storage
Before performing maintenance, the log splitter must be placed in maintenance mode.
1. Turn off engine.
2. Move the control valve handle forward and backward to relieve hydraulic pressure.
After performing maintenance, make sure all guards, shields, and safety features are put
back in place. Failure to follow this warning can result in serious injury.
Refer to the engine owner’s manual for engine maintenance.
What When
How
Hoses
Each Use
Inspect for exposed wire mesh and leaks. Replace
all worn or damaged hoses before starting engine
Hydraulic Fittings Each Use
Inspect for cracks and leaks. Replace all damaged
fittings before starting engine
Nuts and Bolts
Each Use
Check for loose bolts
Beam
Each Use
Apply grease to beam surface
Moving Parts
Each Use
Clear debris
Troubleshooting
Problem
Cylinder rod will not move SOLUTION:
A,D,E,H,J
Slow cylinder rod speed when extending or
retracting
SOLUTION: A,B,C,H,I,K,L
Wood will not split or splits extremely
slowly
SOLUTION: A,B,C,F,I,K
Engine bogs down during splitting SOLUTION:
G,L
Engine stalls under low load condition SOLUTION:
D,E,L,M
