14
Storage (long time)
Wash the cruiser and wipe it dry. Protect it by oiling it with LPS2. Remove the spark plug and pour
a little oil into the cylinder. Turn the ignition key for a few seconds to disperse the oil in the
cylinder. Fit the spark plug. Remove the battery and charge it completely before storing it in a
frost free place. Charge a couple of times during the winter.
The cruiser should be stored in a dry environment.
When you want to get the cruiser ready for riding after winter storage; this is done by washing the
cruiser to remove all the oil etc. Fit in the battery that is fully charged.
Test the cruiser in a safe area to make sure, that it works correctly.
Trouble shooting
Problem
Cause
Solution
The engine does not start
The ignition key is turned the
wrong way
Turn to ON
The fuse is blown
Replace. If it blows several
times, contact your authorized
dealer
The stop switch
Activate the stop switch
The engine dies while driving
Lack of fuel
Tank
Failure to tighten screws
Contact your authorized dealer
The engine leaks oil
Washer not tight
Contact your authorized dealer
The starter is not running
No power
Charge battery or replace it
Wobble in the front fork
Worn bearings
Contact your authorized dealer
Too little traction
Air filter blocked
Clean or replace filter
Lack of braking power
Worn brakes
Contact your authorized dealer
Slack cables
Tighten the cables
If above mentioned solutions do not solve your problem, you should contact your authorized
dealer.