Texas A/S 90063154 User Manual Download Page 11

 

 

11 

working life. Extension cords longer than 50 feet must 
not be coiled, but must be rolled out, lying loosely on 
the ground. 
 
Move the brush forward and backwards between the tile 
grooves. It is most effective when the brush is being 
pulled backwards. 
 
 

Battery and charger 

 

Warning:

 Do not try to disassemble, short circuit or put 

it to extreme heat or fire, as it can cause serious inquiry 
and permanent damage to the battery! 

 
Important: 

To protect the battery from total 

discharge, the machine will stop, when the battery is 
nearly empty.  
The machine must not be started up again after 
automatic shutdown, as it can damage the battery. 
The battery must be recharges before the work can 
continue. 

 
Charging 

 

Only use the original charger which is included. 

 

Before the battery is being used the first time, it is 
recommended to fully charge it first.  

 

Do not try to charge other type of batteries in the 
charger, other than the original battery. 

 

Keep the charger in a dry and warm environment 
(10-25 degrees C) and only use it indoor. It should 
be connected to a normal 230V AC socket. 

 

The surface of the battery can become warm 
during charging. This is normal. 

 

Do not cover battery or charger during charging. 
Allow free ventilation of air. 

 
A fast charger is included with the machine. A full 
charge takes around 60 min. 
 

Attention: 

Remove battery from the charger during storage. 
Avoid water/moisture near the charger. 
 

Important:

 The charger will stop, when the battery is 

full. However, it is not recommended to leave the 
battery in charger for more than 24 hours. 
It is recommended to drain the battery completely and 
fully charge it whenever possible, as it can increase 
the health of the battery. But partial charge will not 
damage the battery. 
 

Storage 

 
Clean the machine after use. Make sure no debris gets 
in through the cooling slots of the motor housing. Store 
the cleaner in a frost free area, out of reach of children.  
 
During winter storage, the battery should be fully 
charged and kept warm at 10-20 degrees C. Charge it 
every 3 months. Make sure to keep ventilation holes 
clean and free from dirt.  
 
Store the charger indoor between 5-25 degrees C. 

 
 

Specifications 

 

Model

 

WR1800

 

Battery voltage 

18V 

Brush speed

1200 /min 

Brush size

100 mm 

Net weight

2 kg 

Battery type 

Lithium-ion 

Battery capacity 

1.5 Ah 

Charging time 

1 hour 

Operate time

Up to 30 min.

Charging unit

220-240V~50/60 Hz

 

Warranty terms and conditions  

 
The warranty period is 2 years for private end users in 
EU countries. 
Products sold for commercial use, only have a warranty 
period of 1 year. 
 
The warranty covers material and/or fabrication faults. 
 
Normal wear and replacement of wearing parts are 
NOT covered by the warranty. 
 
Wearing parts, which are NOT covered for more than 
12 months: 

 Brushes 

 

 Wheel 

 Guards 

  Battery: If the battery is not stored correct (frost-free 

and recharged every 3 months), the durability is 
only guaranteed for 6 months. 

 
The warranty does NOT cover damages/faults caused 
by: 

  Lack of service and maintenance 

 Structural 

changes 

  Exposure to unusual external conditions 

  Damages to the bodywork, protection guards, 

panels etc.  

  If the machine has been improperly used or 

overloaded 

  Use of unoriginal spare parts. 

  Other conditions where Texas cannot be held 

responsible. 

 

* We reserve the right to change the conditions and 
accept no liability for any misprints 

 

Summary of Contents for 90063154













Reviews: