2.5 Safety during the Installation
The installation of the device was carefully tested by qualified
personnel in TEXA.
You must follow some indications provided by the vehicle
manufacturer in order to install the device correctly.
Safety Measures:
•
Follow the indications provided in the vehicle's manual carefully to disassemble the plastic
parts and the access to the compartments.
The installation of the device requires a connection to the vehicle's
electrical system.
Perform the connection to the vehicle's electrical system making sure
not to compromise the safety and its correct functioning.
Safety Measures:
•
Insulate each of the device's connections to the vehicle's electrical system.
•
Do not compromise in any way the quality of the electrical and mechanical OEM wiring.
•
Make sure the electric cables, the wiring in general, the fuel hydraulic pipes and the safety
pneumatic devices of the vehicle are not damaged during the installation.
•
Do not change the current flow of an OEM circuit by cutting it off, increasing it or mechanically
changing it cables if not permitted by the vehicle manufacturer.
The device must be installed so as to ensure it can work correctly and
safely.
At the end of the installation, you must restore the initial conditions of
the vehicle.
Safety Measures:
•
Restore each OEM device (ex.: compartment covers).
•
Replace the fastening elements that are damaged.
11
