manualshive.com logo in svg

Tews Technologies TPMC632 Series, User Manual

Share
Download
Tews Technologies TPMC632 Series User Manual Download Page 48

 

 

TPMC632 User Manual Issue 1.0.6 

Page 48 of 49 

net "DDR_RZQ"                         loc = "F18";          # Bank 1 
net "DDR_ZIO"                         loc = "P19";          # Bank 1 
 
 
# Additional Constratints 
config mcb_performance                    = standard;       # General MCB constraints 
 
 
## ############################################################################################# ## 
## Section: Clocking 
## ############################################################################################# ## 
 
# Define I/O Standards 
net "CLKGEN_S*"                iostandard = LVCMOS15;       # Bank 1 Supply 1.5V 
net "CLKGEN_INTR"              iostandard = LVCMOS15;       # Bank 1 Supply 1.5V 
 
net "USER_CCLK"                iostandard = LVCMOS33;       # Bank 2 Supply 3.3V 
net "MCB_CLK"                  iostandard = LVCMOS33;       # Bank 2 Supply 3.3V 
net "USER_CLK"                 iostandard = LVCMOS33;       # Bank 2 Supply 3.3V 
net "USER_TCLK"                iostandard = LVCMOS33;       # Bank 2 Supply 3.3V 
 
 
# Location Constraints 
net "CLKGEN_SCL"                      loc = "J16";          # Bank 1 
net "CLKGEN_SDA"                      loc = "J17";          # Bank 1 
net "CLKGEN_INTR"                     loc = "C20";          # Bank 1 
 
net "USER_CCLK"                       loc = "AB13";         # Bank 2 
net "MCB_CLK"                         loc = "Y13";          # Bank 2 
net "USER_CLK"                        loc = "U12";          # Bank 2 
net "USER_TCLK"                       loc = "T12";          # Bank 2 
 
 
# Additional Constraints 
net "USER_CCLK"                   tnm_net = "USER_CCLK"; 
timespec "TS_USER_CCLK"                   = period "USER_CCLK" 32 MHz high 50 %; 
 
net "MCB_CLK"                     tnm_net = "MCB_CLK"; 
timespec "TS_MCB_CLK"                     = period "USER_MCB_CLK" 62.5 MHz high 50 %; 
 
net "USER_CLK"                    tnm_net = "USER_CLK"; 
timespec "TS_USER_CLK"                    = period "USER_CLK" 83.3325 MHz high 50 %; 
 
net "USER_TCLK"                   tnm_net = "USER_TCLK"; 
timespec "TS_USER_TCLK"                   = period "USER_CCLK" 32 MHz high 50 %; 
 
 
## ############################################################################################# ## 
## Section: Debug 
## ############################################################################################# ## 
 
# Define I/O Standards 
net "FPGA_?XD"                 iostandard = LVCMOS15;       # Bank 1 Supply 1.5V 
 
net "FPGA_BUT"                 iostandard = LVCMOS15;       # Bank 1 Supply 1.5V 
 
 
# Location Constraints 
net "FPGA_RXD"                        loc = "L15";          # Bank 1 
net "FPGA_TXD"                        loc = "K16";          # Bank 1 
 
net "FPGA_BUT"                        loc = "D21";          # Bank 1 
 
 
## ############################################################################################# ## 
## Section: Module Management 
## ############################################################################################# ## 
 
# Define I/O Standards 
net "FPGA_SW_n"                iostandard = LVCMOS33;       # Bank 2 Supply 3.3V 
 
net "FPGA_RST_n"               iostandard = LVCMOS33;       # Bank 2 Supply 3.3V 
 

Summary of Contents for TPMC632 Series


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands