TPCE261 User Manual Issue 1.0.2
Page 2 of 20
TPCE261-10R
PCI Express x1 Carrier for 32-Bit, 33/66MHz PMC
Modules, 5V PMC I/O signaling voltage, +12V power
supply from PCIe connector used
TPCE261-11R
PCI Express x1 Carrier for 32-Bit, 33/66MHz PMC
Modules, 3.3V PMC I/O signaling voltage, +12V power
supply from PCIe connector used
TPCE261-20R
PCI Express x1 Carrier for 32-Bit, 33/66MHz PMC
Modules, 5V PMC I/O signaling voltage, +12V power
supply from external PCIe graphics power connector
used
TPCE261-21R
PCI Express x1 Carrier for 32-Bit, 33/66MHz PMC
Modules, 3.3V PMC I/O signaling voltage, +12V power
supply from external PCIe graphics power connector
used
This document contains information, which is
proprietary to TEWS TECHNOLOGIES GmbH. Any
reproduction without written permission is forbidden.
TEWS TECHNOLOGIES GmbH has made any
effort to ensure that this manual is accurate and
complete. However TEWS TECHNOLOGIES GmbH
reserves the right to change the product described
in this document at any time without notice.
TEWS TECHNOLOGIES GmbH is not liable for any
damage arising out of the application or use of the
device described herein.
Style Conventions
Hexadecimal characters are specified with prefix 0x,
i.e. 0x029E (that means hexadecimal value 029E).
For signals on hardware products, an ‚Active Low’ is
represented by the signal name with # following, i.e.
IP_RESET#.
Access terms are described as:
W
Write Only
R
Read Only
R/W
Read/Write
R/C
Read/Clear
R/S
Read/Set
2022 by TEWS TECHNOLOGIES GmbH
All trademarks mentioned are property of their respective owners.
