Tews Technologies TAMC900-A1, User Manual

Page: 15 / 17

TAMC900-A1 User Manual Issue 1.0.2 Page 15 of 17
7.4 Analog-In Connector
Pin 2
Pin 3 Pin 1
Pin 23
Pin 24 Pin 25
Figure 7-2 : Pin Locations Analog-In Connector
Pin Signal Level Pin Signal Level
1 GND
2 ANALOG_IN0- 0 – 3.3 Volt 3 ANA 0 – 3.3 Volt
4 GND
5 ANALOG_IN1- 0 – 3.3 Volt 6 ANA 0 – 3.3 Volt
7 GND
8 ANALOG_IN2- 0 – 3.3 Volt 9 ANA 0 – 3.3 Volt
10 GND
11 ANALOG_IN3- 0 – 3.3 Volt 12 ANA 0 – 3.3 Volt
13 GND
14 ANALOG_IN4- 0 – 3.3 Volt 15 ANA 0 – 3.3 Volt
16 GND
17 ANALOG_IN5- 0 – 3.3 Volt 18 ANA 0 – 3.3 Volt
19 GND
20 ANALOG_IN6- 0 – 3.3 Volt 21 ANA 0 – 3.3 Volt
22 GND
23 ANALOG_IN7- 0 – 3.3 Volt 24 ANA 0 – 3.3 Volt
25 GND
Table 7-3 : Pin Assignment Analog-In Connector
7.5 SiCA Connector
The Samtec QTE / QSE Series are used as I/O connection between TAMC900 and the SiCA. The
TAMC900 carries a QSE connector, and the mating QTE connector is populated on the SiCA. The
stacking height is defined by the QTE connector on the SiCA.