ZINGO MOVE KEY
8.
Your ZINGO MOVE is supplied with a nifty remote control
key. Please keep this in a safe place. The key allows
you to lock, unlock, switch off, control the lights,
choose between 2 modes, reset or balance
your ZINGO MOVE.
SWITCH OFF:
To switch off your ZINGO MOVE when you are not riding, press the button.
LOCKING:
To lock your ZINGO MOVE when you are not riding, press the button. Your
ZINGO MOVE is now in standby mode. To unlock, simply press the button again.
Note: You can also unlock your ZINGO MOVE by turning it off and on again using
the power button on the back of the ZINGO MOVE.
CONTROLLING THE LIGHTS:
To switch the front indicator lights on or off while riding your ZINGO MOVE, press
the button.
BEGINNER AND ADVANCED MODES:
Press the “MODE” button to choose between beginner and advanced modes. In
beginner mode the ZINGO MOVE will be easier to ride because the speed is
limited. In advanced mode the ZINGO MOVE will allow for faster movements.
RESETTING YOUR ZINGO MOVE:
In the event that there is an unexpected error, you can reset your ZINGO MOVE
as follows:
Press the button once. Then press both the and the “MODE” button at
the same time for two seconds. This will restore the factory settings.
BALANCING YOUR ZINGO MOVE:
If your ZINGO MOVE begins to feel unbalanced or shudders after long periods of
use, it may need to be balanced as follows:
Place your ZINGO MOVE on a flat surface and ensure that both sides of your
ZINGO MOVE are horizontal. Then press both the and the “MODE” button at
the same time for two seconds. Your ZINGO MOVE’s gyroscope will be balanced again.
