SETTINGS
ADJUST SLEEP TIME
Press
SLEEP
again when the remaining sleep time is displayed to change the sleep time.
SETTING THE CLOCK
Sleep is automatically de-activated when the unit is turned off.
1.
Press and hold
CLOCK
on the unit or remote control until the hour flashes on the display.
ADJUSTING DISPLAY BRIGHTNESS
to set the hour and then press
CLOCK
to shift to minute digits.
2.
Press
or
Press and hold
DEMO/DIMMER
to adjust display brightness. Then press repeatedly until desired brightness is
achieved.
3.
Press
or
to set the minutes
4.
Press
CLOCK
to save settings or
to quit setting without saving
SHOWING DEMONSTRATION
NOTE:
When system is ON, you can press
CLOCK
to display the current time for approx 4
seconds.
Press
DEMO/DIMMER
to turn on/off demonstration mode. The demonstration scrolls through all display
operations.
SETTING THE TIMER
SOUND FEATURES
1.
Press and hold
TIMER
on the remote control until the ON and clock hour flashes on the
display (ON – timer).
VOLUME CONTROL
or
2.
For setting time, press
to set the hour and then press
TIMER
to shift to minute
digits.
Adjust
VOLUME
on the main unit or press
VOL
c
or
d
on the remote control to adjust the volume level.
The volume level shows briefly on the display to show the change in volume level.
3.
Press
or
to set the minute.
4.
Press
TIMER
to change to OFF (timer off time) with clock time flashing. Repeat steps 2 &
3 for timer off time setting.
BASS BOOST
5.
Press
TIMER
to select source. Press
or
to select between TUNER/DISC/USB.
6.
Press
TIMER
to set volume. Adjust
VOLUME
on the main unit or press
VOL
+/- on the
remote control to select desired volume control.
Press
BASS BOOST
to turn on/off boosting the bass frequency. The Bass Boost icon lights on the display when
it is activated.
7.
Press
TIMER
on the remote control to save and quit settings. The timer is automatically
activated once timer setting is saved.
MUTING AUDIO
ACTIVATING THE TIMER
MUTE
on the remote to cut the sound. (Remote Only)
Press
Press and release the TIMER to turn on/off the alarm. The timer icon
is displayed when timer is
activated
USING PRESET EQUALISER CURVES
Press
EQ
on the remote control to toggle among FLAT, ROCK, POP, JAZZ, CLASSIC and CUSTOM. The
display shows your selection briefly.
SLEEP MODE
CREATING A CUSTOM CURVE
You can select the time interval in minutes before the unit turns off automatically.
Press
SLEEP
to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes.
1.
Press EQ on the remote control to select CUSTOM mode.
The
SLEEP
icon lights on the display when sleep mode has been activated
VIEW REMAINING SLEEP TIME
When sleep is activated, press SLEEP
once
to view remaining sleep time.
12.
2.
While CUSTOM is displayed, press
or
to cycle among the displayed bass- and treble- range
levels.
3.
While BAS or TRE is displayed, adjust
VOLUME
to set the associated gain between –10 - +10.
4.
Press
EQ
to exit.
13.
