TEST TONE, LFE TRIMMER AND CHANNEL SELECT.
TEST TONE
Speaker Level balance Adjustment
The test tone function is useful to adjust the relative
MUTE
POWE R
INPU T MODE TEST TONE
volume between speakers in DOLBY DIGITAL or
DOLBY PRO LOGIC II mode.
Once the balance is set, you don’t have to change the
balance as long as the speakers aren’t moved.
1. Adjust the
MASTER VOLUME
to the normal
MEMORY
STATION
TUNER VIDEO 1
VIDEO 2 VIDEO 3
DVD
AUX
TAPE
TUNING
BAND
TUNING
listening level. (Half of max. Volume is
AUTO/
MANUAL
recommended)
2. Press the
TEST TONE
button (on the remote control)
in DTS, Dolby Digital or Dolby PRO LOGIC II
LFE TRIM
LFE TR IM
VOLUME
ST/MONO
DIRECT
IN
CH
SELEC T
BASS
modes.
The test tone is emitted from each speaker each time you
DYNAMIC
TREBLE
DELAY
TIME
SPK
SETUP
press “
TEST TONE
”.
SURROUND SURR OUND
BACK
MODE
SUB ON/OFF
MUTE
POWE R
IN PU T MODE TE ST TONE
TEST
TONE
ME MORY
TUN ER VIDEO 1
VIDEO 2 VIDEO 3
STATION
DVD
AUX
TAPE
CHANNEL SELECT
Balancing volume between speakers in 7.1 channel
mode when using the 7.1 analogue inputs.
TUNING
LFE TR IM
VOLUME
BAND
A UTO/
MANUAL
ST/M ONO
DIREC T
IN
TUNING
CH SE
LEC T
As the Dolby Digital signal is decoded at the external
source, sometimes you may have to balance the volume
between speakers due to the location of the speakers.
BASS
VOLUME
TREBLE
DYN AMIC
DE LAY
TIME
SPK
SE TUP
MUTE
POWER
SURR OUN D SURR OUN D
BACK
MODE
IN PU T MODE TEST TONE
SUB ON/OFF
ME MORY
TUNER VIDEO 1
VIDEO 2 VIDEO 3
DVD
AUX
STATION
TAPE
TUNING
BAND
TUNING
AUTO/
MA NUAL
L(FRONT LEFT)
R (FRONT RIGHT)
LS (SUR. LEFT)
RB
L
B
SUB
C (CENTRE)
RS (SUR.R)
LFE TR IM
VOLUME
ST/M ONO
DIRECT
IN
CH
SELECT
CH
SELECT
BASS
3. Select a speaker by pressing the
“TEST TONE”
button and adjust the level by pressing the
MASTER
VOLUME
button.
VOLUME
DYN AMIC
TREBLE
DELAY
TIME
SPK
SETUP
SURR OUN D SURR OUND
BACK
MODE
The level of each speaker can be adjusted in 1 dB steps
from –10 dB to +10 dB.
4. When the setting is finished, press the TEST TONE
button to stop the test tone.
Note:
You must keep pressing
TEST TONE
until one
complete cycle is finished.
LOW FREQUENCY EFFECT (LFE MIX)
LFE (LOW FREQUENCY EFFECT) MIX LEVEL
(LFE MIX)
Under COAX./OPT modes, when playing a DOLBY
DIGITAL or DTS 5.1CH signal, LFE will appear on
the Display. Press LFE on the remote, and press VOL
+/- key to adjust the level between 0dB to –10dB.
Note:
The
LFE
level will resume to normal, if
MASTER VOLUME is not adjusted for 5 seconds.
18
SUB ON/OFF
1. Press
“CH SELECT
” on the remote, the following
loop will appear on the display:
L(FRONT LEFT)
R (FRONT RIGHT)
LS (SUR. LEFT)
RB
L
B
SUB
C (CENTER)
RS (SUR. R)
2. Adjust the
Master Volume
to balance all speakers.
The level of each speaker can be adjusted in 1 dB
steps from –10 dB to +10 dB.
Note:
If the
Master Volume
is not adjusted for 5 seconds in
Channel Trimmer mode, the level will return to normal.
