TEUPEN LEO 27T, Translation Of The Operating Instructions

Page: 113 / 312

Operation
07/05/2018 113
7.12 Crawler chassis, height- and width-adjustable
The height, and thus the width too, of the two crawler chassis can be adjusted in-
dependently. This function is required primarily when driving along slopes. The ad-
justment is executed mechanically or hydraulically (optional).
7.12.1 Hydraulic crawler adjustment
Personnel:
n
Trained persons
Protective equipment:
n
Occupational safety clothing
n Safety boots
n Safety helmet
WARNING
Risk of injury due to improper height/width adjustment!
The machine may topple or slip if height and width adjustments are made improp-
erly. This can cause severe injuries and significant material damage.
– Observe the machine’s maximum tilt angle.
– Always keep clear of the down slope side of the machine.
– Make sure that the area beside the machine is clear of people.
Fig. 136
7.12.1.1 Crawler chassis, extending and retracting hydraulically
1. Switch on the machine (
Ä
Chapter 7.3 „Switching the machine on/off”, on page
73).