TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Page: 81 / 208

6.6 Operating the machine
Personnel: n Trained people
Protective equipment: n Protective clothing
n
Safety boots
n Protective helmet
n Safety harness
WARNING!
Danger of injury due to improper opera-
tion!
Improper operation can cause severe injuries
and significant property damage.
– While in the working basket, always wear
a safety harness, do not swing or move
jerkily.
– Always perform all work with at least two
people, whereby one person must remain
on the ground in order to activate the
emergency control if necessary.
– Make sure that the ladder is folded up and
locked.
– Do not climb onto the safety fence around
the basket.
– Do not work on or near high-voltage lines.
– Watch out for high obstacles.
– Make sure that when moving the working
basket, no body parts are crushed, e.g.
against a wall.
– At wind speeds above 12.5 m/s (wind
strength 6), stop work immediately.
1. Put the machine in working position
( Ä Chapter 6.5 ‘Putting the machine in work posi-
tion’ on page 72).
2. Set function selection switch ( Fig. 55 ) to
[platform function] (blue).
Fig. 55: Function selection
switch
Operation
13.02.2013 Aerial access platform Leo15GT 2012 77