TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Page: 70 / 208

Switching on and off during operation is done using the
engine switch (Fig. 43/1) at the control panel.
1. To start the combustion engine press the motor
switch (
Fig. 44 ) upwards . Immediately let go of
the motor switch once the combustion engine
starts.
NOTICE!
Long starting processes can cause
damage to the starter.
2. Let the combustion engine warm up for approxi-
mately 15 seconds before starting to operate the
aerial access platform.
To switch off the combustion engine push the
motor switch (
Fig. 45 ) downwards to and hold it
until the combustion engine stops.
6.3 Shutting down in case of emergency
In dangerous situations, movements of components
must be stopped as quickly as possible and the power
supply switched off.
In case of emergency, proceed as follows:
1. Trigger immediate emergency stop with Emer-
gency Stop button.
2. If there is no danger to your own health, rescue
people in the danger zone.
Fig. 43: Engine switch
Switching on
Fig. 44: Switching on the com-
bustion engine
Switching off
Fig. 45: Switching off the com-
bustion engine
Operation
13.02.2013 Aerial access platform Leo15GT 2012 66