TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Page: 131 / 208

Fault descrip-
tion
Cause Remedy Per-
sonnel
on rough floor,
defective spring
set, frozen mate-
rial between the
rollers
8.3 Error code list
Faults and error codes are displayed on the display
(Fig. 117/1) in the control box.
On some messages CM or CS can appear
additionally. This relates to the respective
card that has triggered the fault message.
– CM – CAN MASTER (master carte)
(Display at the control box)
– CS – CAN SLAVE (slave carte)
(card on the interior side of the control box
door)
No. Description
1 Software error / hardware error.
2 Software error / hardware error.
3 Software error / hardware error.
4 Hardware error microprocessor.
5 Check inputs floor pressure and outrigger 1 lock.
6 Check inputs floor pressure and outrigger 2 lock.
7 Check inputs floor pressure and outrigger 3 lock.
8 Check inputs floor pressure and outrigger 4 lock.
9 Check inputs for the position switch "wide braced" outrigger 1.
10 Check inputs for the position switch "wide braced" outrigger 2.
11 Check inputs for the position switch "wide braced" outrigger 3.
12 Check inputs for the position switch "wide braced" outrigger 4.
13 Check safety relay 1 monitoring contact.
Fig. 117: Display
Faults
13.02.2013 Aerial access platform Leo15GT 2012 127