6
Use
Activating and deactivating
• The subwoofer is activated or deactivated with the switch
6
“Power”. If the subwoofer is on, the control LED
4
is illumi-
nated.
Automatic activation/deactivation
• Switch
3
“On/Auto”:
–
Auto
position: The subwoofer activates as soon as an
audio signal is present on jack
2
“Line In” (control LED
4
is
illuminated in green).
If there's no audio signal for 10 minutes, the subwoofer
switches to standby (control LED
4
is illuminated in red).
–
On
position: The subwoofer is continually activated.
Volume
• You can control the volume of your subwoofer using the
volume control
1
“Volume”.
Phase
• Switch
5
“Phase” is used to activate and deactivate phase
shifting (180°) for the subwoofer. Choose a setting at which
the subwoofer emits the loudest and most precise sound.
Crossover frequency
• The subwoofer must be “On” in the AV receiver's bass
management/speaker management (“Speaker Setup”). The
appropriate crossover frequency to be set there depends on
the satellites being used. You can
fi
nd speci
fi
cations for the
crossover frequency of the respective satellites in the techni-
cal data section of our web shop.
• The crossover frequency is adjusted automatically in case of
using a Soundbar.
• Notes on setting up the crossover frequency for the Decoder-
Station 5 Mk2 can be found in the corresponding operating
instructions.
US 2106/1 SW
1
2
6
3
4
5
Cleaning and care
Clean the subwoofer regularly with a soft, damp micro
fi
ber
cloth. Please be absolutely sure to observe the following notes
in the process:
• If possible, only use plain water without any additives. In
case of stubborn marks, a mild soap solution may be used.
Danger
Risk of electric shock!
In contact with live parts, water can lead to electric
shock or short circuit.
• Make sure that no liquid penetrates the unit.
• Disconnect the mains plug before cleaning.
Attention
Risk of damage!
Using the wrong cleaning materials may damage
the delicate surface of the case.
If possible, only use plain water without any additives. In
case of stubborn marks, a mild soap solution may be used.
In no circumstances should caustic cleaning products, white
spirit, thinners, petrol or similar be used for cleaning.
