background image

5

 •  Ultima 800 Mk II

Unpacking and setup

Open the box carefully, take out the half shell EPE pa-
ckaging foam and carefully lift the speaker out of the box 
without touching the diaphragms.

Connector cables

Due to differing customer requirements, the 
Ultima 800 Mk II speakers are shipped without 

connector cables. You can fi nd suitable cables in our 
webshop (www.teufelaudio.com) in the “Accessories” 
area.

Check to be sure

Check that all items have been delivered and that nothing is 
damaged:

Item Units Article

1

Ultima 800 Mk II speaker

2

Metal bra-
ckets

4

Flat  spikes

4

Allen head 
screws

If the delivery exhibits damages, do not use the speakers, 
instead consult our service department (see Page 3).

Removing the protective grids

The protective grids are secured by magnets on the 
front of the speaker and can be easily removed. When 
the protective grids are removed, high frequency output 
becomes clearer in particular.
To remove the protective grids, reach behind them and 
slowly pull them off to the front.

Attention

Risk of damage!

Make sure that you do not touch the highly 
sensitive diaphragms.

Location tips

Stereo triangle

Left speaker

Right speaker 

•  Select a stable, level base.
•  Make sure that the environment is clean and free from 

dust.

•  Avoid placing the unit close to sources of heat or in 

direct sunlight.

•  Arrange the connector cables so that they do not pose 

a trip hazard.

•  Do not place any heavy objects on the cables or the 

speakers.

The following data concern an “ideal listening room”, 
in which the listener sits in a central position at a suffi -
cient distance in front of the speakers (see the adjacent 
graphic) and no objects (tables or the like) are located 
in between. Unfortunately, the room, furnishings or other 
circumstances do not always allow for optimum arrange-
ment.

Modern amplifi ers offer a variety of possibilities for 
electronically compensating losses associated with the 
arrangement. The following general rule applies: You can 
always experiment on what works best in your listening 
room in terms of sound and appearance based on our 
recommendations. Let your ears (and eyes) be the judge!

The speakers should be situated to the left and right of 
the listener and if possible, form an equilateral triangle 
with the listener – the so-called stereo triangle (distance 
from the listener = distance between the speakers). The 
speakers should project sound directly into the room or 
be arranged slightly towards the listener.

91890 GB 20110808.indd   5

91890 GB 20110808.indd   5

08.08.11   14:47

08.08.11   14:47

Summary of Contents for Ultima 800 Mk II









Reviews: