6
• T 800 SW
Connection and operation
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a
trip hazard.
Subwoofer
Pull the mains plug of your AV receiver out of the socket.
Signal connection
You will need a mono RCA connector cable for the signal
connection. With this cable you connect the RCA jack
2
“In” on the back side of the subwoofer with the RCA jack
for the subwoofer of your receiver. You will fi nd more
information on this in the operating instructions of your
receiver.
Connecting to a power supply
• Ensure that the mains switch
5
“Power” is switched off
(“0 OFF” position).
• Connect the mains connector jack
6
with a mains
socket using the power cord
햸
.
• Also plug the mains plug of your AV receiver back into
the socket.
Satellite speakers
• Connect the satellite speakers as described in the cor-
responding operating instructions.
Activating and deactivating
Activating and deactivating
• You can activate or deactivate the subwoofer with
the switch
5
“Power”. Once the subwoofer has been
activated, the power LED
1
“Power” is blue.
Automatic activation/deactivation
• If the switch
4
“Auto • On” is set to “
Auto
”, the
subwoofer will activate as soon as an audio signal is
present at the input
2
.
If there is no audio signal for 30 minutes, the subwoof-
er will switch to standby and the power LED
1
“Power”
will illuminate in red.
• When set to “
On
”, the subwoofer is always on.
Volume
• Adjust the subwoofer volume with the volume control
3
.
2
1
4
3
5
6
T 800 SW
T 800 SW
91751 GB 20110110.indd 6
91751 GB 20110110.indd 6
11.01.11 16:09
11.01.11 16:09
