Teufel System 5 THX Select2 Technical Specifications And Operating Manual Download Page 10

Technical Specifications and Operating Manual

10

· System 5 THX Select2

Settings

Speaker loads

Note that these speaker load 

values are given under the as-

sumption that the  

AV receiver filters out any  

potentially damaging bass 

content before transmitting the 

audio signals to the  

satellite speakers.

Setting up the AV receiver/amplifier

To  take  full  advantage  of  your  System  5  THX

 

Select2 with the S 5000 SW active subwoofer, use 
the “Speaker  Setup”  utility  of  your  AV  receiver 
to  set  the  satellites  to “small”  or “normal” (not 
“large”).  This  ensures  that  the  speakers  will  re-
ceive  the  proper  amount  of  signal  and  that  the 
volumes of the subwoofers and front speakers will 
be matched.

Set  the  subwoofer  to  “On”  using  the  “Speaker 
Setup” utility (bass management and/or speaker 
management) of your receiver. Set the crossover 
frequency for the System 5 THX Select2 to 80 Hz. 
100 Hz is another possible setting.

Setting up the subwoofer 

Many current AV receivers are able to automati-
cally set the correct phase and level for the sub-
woofer  using  the “Speaker  Setup”  utility  by  en-
tering the distance between the subwoofers and 
the listening spot. For this to work correctly, the 
phase  switch  of  the  subwoofer  must  be  set  to 
“0°” and the volume to “THX”. 
If you are using an older AV receiver or another 
type of amplifier that does not allow you to set 
the subwoofer distance:
You  can  use  the  phase  switch  of  the  subwoof-
er  to  manually  adjust  the  phase  to  the  other 
speakers.  The  goal  here  is  to  ensure  that  all 
speaker  membranes  move  in  the  same  direc-
tion  in  the  vicinity  of  the  crossover  frequency. 
If the phase is not set correctly, this can lead to  
reduced  bass  response  or  even  cancellation  of 
bass frequencies. If the subwoofer is positioned 
between the two front speakers, we recommend 
setting the phase to “0°”. If the subwoofer is po-
sitioned closer to the listening spot, a phase of 
“180°” may be more appropriate. If the subwoof-
er is placed elsewhere, the “180°” setting can be 
used to compensate for reduced bass response. 
Always  set  the  phase  control  to  the  position 
where the bass response is strongest. 

Compared  to  the  home  theatre  settings,  the 
volume  setting  of  the  subwoofer  may  need  to 
be readjusted accordingly for playing different 
types of music. Whereas an action-packed DVD 
typically contains massive amounts of sub-bass, 
much music content may not. This will be espe-
cially noticeable if you calibrate your system for 
optimum DVD playback. To find the best compro-
mise between differing sound sources, use your 
own subjective judgement. 

Summary of Contents for System 5 THX Select2













Reviews: