25
Teufel
·
LT 7
Submenu: EQ LFE Input / EQ Stereo Input
The “EQ LFE Input / EQ Stereo Input” submenu (de-
pending on the operating mode) provides three
filters for fine-tuning the M 7200 SW. These corre-
spond to a three-band parametric equalizer. With
these filters, you can accurately calibrate the
subwoofer's frequency response to the acoustic
properties of your room – and to your individual
listening tastes.
Figure:
EQ LFE Input, EQ LFE In Filter 1
Settings available in this submenu:
Figure:
Available settings in the “EQ LFE/Stereo
Input” submenu
Use the “Up” and “Down” buttons to select the in-
dividual filters and press “Enter” to access their
parameters.
Figure:
EQ LFE In Filter 1, Level
Each filter provides three parameters, which you
can access with the “Up”, “Down” and “Enter”
buttons.
Settings available for the filters:
Figure:
Available settings in the “EQ LFE/Stereo
In Filter 1” submenu
EQ LFE/Stereo Input Filter – Level
Figure:
Level, Set -4.5dB
With the “Level” parameter, you can specify the
equalizer's amount of boost/attenuation in dB.
Press the “Up” and “Down” buttons to select the
desired level amount. Press “Enter”. The sym-
bol indicates that the new setting has been
applied.
Figure:
Parametric frequency attenuation
(example: 12 dB)
11. Advanced setup options for the M 7200 SW
Note:
The filters are primarily designed
for frequency attenuation rather
than boosting, as excessive
boosting quickly degrades the
signal quality.
