14
• Kombo 11
Inserting/changing the
batteries
The remote control is powered by 2
type AAA batteries.
You should change the batteries if the
remote control stops working properly
or after 2 years at the latest:
1. Gently depress the arrow on the
battery compartment cover on the
back side of the remote control and
push the cover down. Remove the
cover.
2. If applicable, remove any old
batteries (please observe the
disposal notes on page 8).
3. Insert the batteries according to
the image in the battery compart-
ment and make sure the polarity is
correct.
4. Place the cover back on the
compartment and push it closed.
CAUTION
Leaking battery acid may lead
to chemical burns.
–
Do not allow battery acid to
come into contact with skin,
eyes or mucous membranes.
In the event of contact with
acid, immediately flush the
applicable areas with plenty
of clean water and consult a
physician if necessary.
Batteries (particularly lithium
batteries) can explode if used
improperly.
–
Never attempt to recharge
batteries.
–
You must not heat or
short circuit batteries and
rechargeable batteries or
dispose of them in fire.
–
Do not expose batteries and
rechargeable batteries to
direct sunlight.
Functionality
The remote control relays the control
signals by means of infrared light. For
this, you will have to point the front
side of the remote control towards
the Kombo 11. Make sure that the
infrared light is not obstructed by
objects.