• iTeufel Radio v2
11
Quickly activating/deactivating the alarm
You can quickly activate and deactivate the alarms with
the buttons
28
“ALARM 1/2” on the remote control:
Press the corresponding button
•
28
“ALARM 1” or
“ALARM 2”. The wake-up time that has been set ap-
pears in the display fi eld and the alarm status “ON” is
also shown above.
If you want to activate the alarm, briefl y press the vol-
•
ume control
6
“Volume” or the button
25
“Enter”. The
alarm has now been set and is active.
Otherwise press the corresponding button
•
28
“ALARM
1” or “ALARM 2” again. The alarm status “OFF” ap-
pears in the display fi eld above the alarm time.
If you want to deactivate the alarm, briefl y press the
•
volume control
6
“Volume” or the button
25
“Enter”.
The alarm has now been turned off and is inactive.
Otherwise, press the corresponding button
•
28
“ALARM
1” or “ALARM 2” again, thereby ending the process.
With the above steps, the device will automatically abort
the process if there is no button activity for fi ve seconds.
Snooze
The wake-up time has been reached, the alarm tone or
music wakes you up. “Just one more minute..” No prob-
lem: Press the button
17
“Mute/Snooze” and the iTeufel
Radio v2 will remain silent for seven minutes. You can do
so up to fi ve times, afterwards the device gives up and
lets you sleep in peace..
Sleep function
With this function, the iTeufel Radio v2 turns off after a
preset time.
Start the selected playback.
1.
Press the button
2.
23
“Sleep”. The status “SLEEP” will
appear in the display fi eld
2
and behind it “00” blinks
in the display fi eld.
With the buttons
3.
4
“Tune +” and
5
“Tune –” and/or
32
“Tune +/–” you can set the desired deactivation time in
15-minute increments. The maximum setting is 90 min-
utes, the setting “00” deactivates the sleep function.
To complete the process, briefl y press the volume con-
4.
trol
6
“Volume” or the button
25
“Enter”.
The sleep function has now been started.
Important!
If you set the music volume too low when going
to bed and have also selected music as your
alarm tone, the volume may be too low! If this is the
case, opt for the alarm tone (“BEEP”).
Display fi eld
You can set the brightness of the display fi eld as follows:
Briefl y press the button
1.
3
and/or
26
“Set” once. The
message “CLOCK” will blink in the display fi eld
2
.
Briefl y press the button
2.
5
“Tune –” and/or
32
“Tune –”
three times. “DISPLAY” will blink in the display fi eld
2
.
Briefl y press the volume control
3.
6
“Volume” or the
button
25
“Enter” once. The message in the display
fi eld
2
will change to “DISPLAY BACKLITE” (display
fi eld lighting) and the current setting will blink in the
background.
Set the desired brightness using the buttons
4.
4
“Tune
+” and
5
“Tune –” and/or
32
“Tune +/–”. Potential set-
tings are 1 (dark) to 5 (bright) or “AU” for automatic.
With “AU”, the brightness automatically adjusts to the
room lighting.
To complete the process, briefl y press the volume
5.
control
6
“Volume” or the button
25
“Enter” again. The
display fi eld brightness has now been set.
17
Mute / Snooze
91301 GB 20100804.indd 11
91301 GB 20100804.indd 11
04.08.2010 11:21:50 Uhr
04.08.2010 11:21:50 Uhr
