Teufel concept c 300 black edition, Technical Description And Operating Instructions

Page: 10 / 16

10
• Concept C 300
Basic functions
Activating and deactivating
• Using the mains switch 7 , you can activate or deacti-
vate your Concept C 300. After activation, your device
is in standby mode and LED
1
“Standby” is red.
• With the button
1
“Standby” or
12
, you can switch
your Concept C 300 to operating and/or standby mode
(Standby). In the operating mode, the LED 1 “Standby”
is blue.
Selecting a source
After activation, the USB sound card is activated as a
source.
• Using the button
14
“Input”, you can switch the source
between the USB sound card and RCA jacks.
When you switch, the LED 1 “Standby” is purple
briefly.
Adjusting the volume
• Increase the volume: Press the button
15
+.
• Decrease the volume: Press the button 15 –.
Adjusting the bass level
You can adjust the volume of the subwoofer separately.
1. Press the button
13
“Bass”.
The LED 1 “Standby” is purple.
2. Adjust the base level as you like using the buttons 15
+ /
–
.
3. Press the button
13
“Bass”.
The LED 1 “Standby” is again blue. If no button is
pressed for six seconds, the device will also switch to
normal operation.
Automatic standby
If there is no input signal for 20 minutes the subwoofer
will automatically switch to standby. To switch it back on
again, press the “Standby” button
1
or
12
.
Connecting to a power supply
• Ensure that the mains switch 7 “Power” has been
turned off (“0 OFF” setting).
• Connect the mains connector jack 8 with a power sup-
ply socket via the mains cord
d
.
12
13
14
15
d
8 7
1