10
·
Cinebar 51 THX
Before start-up
Always switch off the Cinebar 51 THX System, the
television and all other connected components
before changing the cabling.
Connection to a TV set
Connect the sound output of your TV to the ana-
logue input of the Cinebar 51 Unit. Use a standard
high-quality cinch cable for this purpose. You can
also use a digital connection, if available. If your
television sound comes from an external receiver,
connect it as a sound source instead.
For more information on connecting external
components to the Cinebar 51 Unit, please see
the relevant operating instructions for these
products.
Blu-ray- or DVD player connection
Connect the sound output of your Blu-ray- or DVD
player to the Cinebar 51 Unit. We recommend
using digital audio interfaces, because they are
capable of transferring encoded surround for-
mats. The Blu-ray- or DVD player also needs to be
connected to the TV set for picture playback.
Alternatively or in addition to a Blu-ray- or DVD
player, you can also connect games consoles, CD
players and other appliances to the free jacks on
the Cinebar 51 Unit. However, record players can-
not be connected to the Cinebar 51 THX System
without an external preamplifier.
Note
Remove the cover from the
socket and the jacks before you
use the optical cable.
Note
If you are playing TV sound via
the Cinebar 51 THX System, you
can control the volume from the
TV appliance.
This also applies to peripheral
appliances such as Blu-ray- or
DVD players whose sound is
reproduced through the TV set.
Blu-ray- or DVD player and TV set connection
1
NOTE
5
Coaxial In
SUB Out
Optical In
L
R
L
R
AUX 2 In
AUX 1 In
R
L
Audio
Out
Optical
Out
Coaxial
Out
Audio
TV
Or
Stereo audio cable
or
or
digital audio
cable
Coaxial In
SUB Out
Optical In
L
R
L
R
AUX 2 In
AUX 1 In
DVD-Player
Audio
Out
L
R
Optical
Out
Coaxial
Out
Audio
Or
Stereo audio cable
or
or
digital audio
cable
Bluy-ray- /
