• CINEBAR 11
33
Advanced
Advanced system settings:
• Source TV – source used for
TV audio
If your TV set does not emit the
television audio via HDMI ARC,
you can select another audio
input here. If you then select
“TV” as source, the CINEBAR will
switch to this input:
TV
– normal connection via
the HDMI TV jack
(14)
for ARC
capable TV sets. PCM Stereo,
Dolby Digital and DTS (if this
can be output by the TV set)
possible.
Optical
– for TV sets with an
optical or coaxial-digital output.
PCM and Dolby or DTS possible.
AUX
– for TV sets with an
analogue audio output or
headphone jack. Only analogue
signal possible, with or without
Dolby Pro Logic II.
• LipSync – synchronises the
picture and sound
Digital image processing in the
television set requires some
time. To ensure that the picture
and sound stay in sync, you can
configure an audio delay here
between 0 and 200 ms.
•
AutoOn – Select AutoOn for
each source
For each source (TV, HDMI, AUX,
Optical, Bluetooth
®
), you can
activate and deactivate auto-
matic activation here (also see
page 25).
For the “AUX” source, also set
the sensitivity for automatic
activation:
Off
(no automatic activation),
Minimal
(only with a high input
level),
Low, Mid, High,
Maximal
(already at a low input
level)
• Standby
When a HDMI source device
is connected via the HDMI IN
jack
(15)
and this device is
switched off, the CINEBAR can
also switch to standby.
Possible settings: Yes, No
