background image

5

 

 • AmpStation

service department or a person with 
similar qualifications.

• This device is disconnected from the 

grid by pulling the mains plug. Thus, 
make sure that the mains plug is 
always easily accessible.

• If the device emits smoke, smells 

burnt or produces unusual sounds, 
immediately disconnect it from the 
mains and do not operate it further.

•  Never open the device housing.

Repairs may only be carried out by 
an authorised specialist workshop. In 
the process, only parts that corre-
spond to the original device data may 
be used.

• Only use the accessory products 

specified by the manufacturer.

• Only use the device in indoor areas.

•  Do not operate the device in wet 

rooms and protect it from dripping 
and splash water. 
Make sure that no vases or other 
vessels filled with liquid are located 
on the device or nearby in order to 
prevent liquid from penetrating the 
housing. If water or other debris ends 
up penetrating the housing, immedi-
ately pull the mains plug and take out 
any batteries. Then send the device to 
our service address.

• Never modify the device. Unauthor-

ized interventions may affect the 
safety and functionality.

• Never touch the mains plug with wet 

hands.

• Power overload due to lightning 

strike may damage or destroy the 
unit. If the unit is unattended for a 
prolonged period (e.g. when on va-
cation) or in the event of an incom-
ing storm, pull the mains plug.

An unsuitable setup location may 
result in injury and damage.

• If the AmpStation is not securely 

mounted, do not use it in vehicles, 
in unstable locations, on wobbly 
tripods or furniture, on underdimen-
sioned brackets etc. The AmpSta-
tion may tip or fall over and cause 
injury to persons or be damaged 
themselves.

• Place the AmpStation in such a way 

that the cables do not pose a trip 
hazard.

• Do not use the device in environ-

ments where there is a risk of 
explosion.

Children can become trapped in 
the packing film when playing and 
suffocate.

• Do not allow children to play with 

the device or the packing film. Dan-
ger of suffocation.

• Ensure that children do not remove 

small parts from the device or take 
them off of the device (e.g. control 
knobs or plug adapters). They could 
swallow the parts and choke.

• Never allow children to operate elec-

trical units unsupervised.

Summary of Contents for AmpStation

















Reviews: