TEUCER WP-4RGBCCT Quick Start Manual Download Page 8

4 Zone DMX and RF wall panel

for Single Colour, Tunable White, RGB, RGBW 
and RGBCCT LED strip

www.teucerled.co.uk

V002-11-2019

Problem

Cause

Corrective 

No light

•  No power.

•  Wrong connection or unsecure 

connection.

•  Check the power.

•  Check the connection.

Wrong Colour

•  Wrong connection of RGB/W wires.

•  Retrace and reconnect RGB/W 

wires.

Uneven intensity 

between front and 

rear of the strip, with 

voltage drop

•  Output cable is too long.

•  Cable diameter is too small.

•  Overload beyond driver capability.

•  Overload beyond receiver capability.

•  Reduce cable or loop supply.

•  Change to a thicker cable.

•  Replace with a suitable higher 

power driver.

•  Add a power repeater.

No response

from the remote

•  The wall panel has no power.

•  Beyond controllable distance.

•  The controller isn’t synchronised 

with the remote.

•  Check the incoming supply to the 

wall panel.

•  Reduce remote to receiver 

distance.

•  Re-sync the remote.

Troubleshoot

•  Products must be installed and serviced by qualified electrician.

•  Please ensure the receiver is mounted in a water proof enclosure if installed in an outdoor environment, 

avoiding metallic enclosures.

•  Always ensure products are mounted in areas with adequate ventilation to avoid overheating.

•  Please ensure outputs of any power suppliers used in conjunction with this product comply with its 

working voltage.

•  Never install product whilst connected to power and double check connections before switching on to 

avoid short circuits.

Safety

Warranty

Should this product fail during the 5 year warranty period it will be 

replaced free of charge, subject to the correct installation of the original 

product in accordance with applicable and appropriate electrical 

codes and instructions provided by Teucer, as well as subsequent 

return of the faulty unit. Teucer does not accept responsibility for any 

installation costs associated with the replacement of this product 

and Teucer reserves the right to alter specifications without prior 

notice. For further information, please see our Terms and Conditions. 

www.teucerled.co.uk/terms-and-conditions/

Teucer (UK) Ltd 

Bedford House, Fulham Green

69-79 Fulham High Street

London, SW6 3JW, UK

Tel: +44 (0)20 7350 4429

Fax: +44(0)20 7228 4647 

www.teucerled.co.uk

[email protected]

No.

Name

No.

Name

1

RGB jump

6

RGB fade in and out

2

RGB smooth

7

Red fade in and out

3

6 color jump

8

Green fade in and out

4

6 color smooth

9

Blue fade in and out

5

Color temperature smooth

10

White fade in and out

Dynamic play mode presets

Summary of Contents for WP-4RGBCCT









Reviews: