background image

Smart WIFI switch

1 Gang

www.teucerled.co.uk

V001-11-2019

Problem

Cause

Corrective 

Unable to switch

ON/OFF (No indicator 

light)

•  No power.

•  Wrong connection or unsecure 

connection.

•  Check the power.

•  Check the connection.

Cannot connect 

switches to WIFI

•  Trying to connect to 5Ghz (802.11ac)

•  Connect to 2.4GHz home network 

(802.11b/g/n)

•  Products must be installed and serviced by qualified electrician.

•  Never install product whilst connected to power and double check connections before switching on to 

avoid short circuits.

•  Ensure all terminal screws are fully tightened and product is securely fixed to its mounting box prior to 

turning on the mains supply.

Safety

Warranty

Should this product fail during the 3 year warranty period it will be 

replaced free of charge, subject to the correct installation of the original 

product in accordance with applicable and appropriate electrical 

codes and instructions provided by Teucer, as well as subsequent 

return of the faulty unit. Teucer does not accept responsibility for any 

installation costs associated with the replacement of this product 

and Teucer reserves the right to alter specifications without prior 

notice. For further information, please see our Terms and Conditions. 

www.teucerled.co.uk/terms-and-conditions/

Teucer (UK) Ltd  

Bedford House, Fulham Green

69-79 Fulham High Street

London, SW6 3JW, UK

Tel: +44 (0)20 7350 4429

Fax: +44(0)20 7228 4647 

www.teucerled.co.uk

[email protected]

Summary of Contents for TSS-1G












Reviews: