Warranty
•
Products must be installed and serviced by qualified electrician.
•
Please ensure the receiver is mounted in a water proof enclosure if installed in an outdoor environment,
avoiding metallic enclosures.
•
Always ensure products are mounted in areas with adequate ventilation to avoid overheating.
•
Please ensure outputs of any power suppliers used in conjuction with this product comply with its working
voltage.
•
Never install product whilst connected to power and double check connections before switching on to avoid
short circuits.
Safety
Should this product fail during the 3 year warranty
period it will be replaced free of charge, subject to the
correct installation of the original product in accordance
with applicable and appropriate electrical codes and
instructions provided by Teucer, as well as subsequent
return of the faulty unit. Teucer does not accept
responsibility for any installation costs associated with
the replacement of this product and Teucer reserves the
right to alter specifications without prior notice. Teucer
can offer 5 year warranty upon request. For further
information, please see our Terms and Conditions.
www.teucerled.co.uk/terms-and-conditions/
No.
Name
No.
Name
1.
RGB jump
6.
RGB fade in and out
2.
RGB smooth
7.
RED fade in and out
3.
6 colour jump
8.
GREEN fade in and out
4.
6 colour smooth
9.
BLUE fade in and out
5.
Yellow cyan purple
smooth
10.
WHITE fade in and out
Dynamic play mode presets
Troubleshoot
Problem
Cause
Corrective
No light
•
No power.
•
Wrong connection or unsecure con-
nection.
•
Check the power.
•
Check the connection.
Wrong Colour
•
Wrong connection of RGBW wires.
•
Re trace and reconnect
RGBW wires.
Uneven intensity
between front and
rear of the strip, with
voltage drop
•
Output cable is too long.
•
Cable diameter is too small.
•
Overload beyond driver capability.
•
Overload beyond receiver capability.
•
Reduce cable or loop
supply.
•
Change to a thicker
cable.
•
Replace with a suitable
higher power driver.
•
Add a power repeater.
No response
from the remote
•
The battery has no power.
•
Beyond controllable distance.
•
The controller isn’t synchronised with
the remote.
•
Replace battery.
•
Reduce remote to receiv-
er distance.
•
Re-sync the remote.
Teucer (UK) Ltd
Head office
Bedford House, Fulham Green
69-79 Fulham High Street
London, SW6 3JW, UK
Tel: +44 (0)20 7350 4429
Fax: +44(0)20 7228 4647
www.teucerled.co.uk
[email protected]
4 zones RF controller and receiver for RGBCCT LED strip
Controller and receiver
LR-4RGBCCT and R5C
www.teucerled.co.uk
V001
V001
