Page 3
PROGRAM MODE 2
Program Mode 2 can only be entered from Program Mode 1, and is done by pushing and holding the
joystick inward for the amount of time set by the Hold Delay Time. The indicator changes from red (for
Program Mode 1) to green, and one chirp is emitted to indicate the Uno is now in Program Mode 2.
The
Joystick Sensitivity
settings control the maximum amount of deflection output by the Uno in XY and
RXY Modes.
In Program Mode 2, set the XY joystick movement
sensitivity by pushing the stick up. The indicator
changes to the color associated with the current
Joystick Sensitivity setting, then fades out and the
Uno chirps the same number of times associated
with that Joystick Sensitivity setting.
To change the Joystick Sensitivity setting, push the stick right to increase and left to decrease. If you push
right when in the most sensitive setting (setting 4), it ‘wraps around” to the least sensitive setting (setting 1).
Similarly, pushing left while in setting 1 wraps around to setting 4. When a change is made, the Uno chirps
the same number of times as the associated setting number, and the indicator turns to the color associated
with that setting, then fades out.
The Uno remains in the Joystick Sensitivity setting mode until a quick inward push is performed, which
returns the Uno to Program Mode 2. The Uno chirps twice, the indicator turns green and the Uno is now in
Program Mode 2.
In Program Mode 2, set the Hold Delay Time by
pushing the stick down. The indicator changes to
the color associated with the current Hold Delay
Time setting, then fades out and the Uno chirps the
same number of times associated with that setting.
The
Hold Delay Time
is the amount of time the joystick needs to be pushed in and held before the desired
action is taken. Hold Delay Time works with joystick button press holds and when entering Program Modes.
Setting 1
Least sensitive
Blue
Setting 2
Green
Setting 3
Yellow
Setting 4
Most sensitive
Red
JOYSTICK SENSITIVITY
Setting 1
1/4 second
Blue
Setting 2
1/2 second
Green
Setting 3
3/4 second
Yellow
Setting 4
1 second
Red
HOLD DELAY TIME
To change the Hold Delay Time setting, push the stick right to increase and left to decrease. If you push right
when in the longest time setting (setting 4), it ‘wraps around” to the shortest time setting (setting 1). Similarly,
pushing left while in setting 1 wraps around to setting 4. When a change is made, the Uno chirps the same
number of times as the associated setting number, and the indicator turns to the color associated with that
setting, then fades out.
The Uno remains in the Hold Delay Time setting mode until a quick inward push is performed, which returns
the Uno to Program Mode 2. The Uno chirps twice, the indicator turns green and the Uno is now in Program
Mode 2.
Audio Chirps
that occur when changing Operational Modes and performing Button Holds can be toggled on
and off in Program Mode 2 by pushing the joystick left. The audio chirps are always enabled while in
Program Modes 1 and 2 in order to indicate programming selections. Disabling chirps stops them while in
any Operational Mode and during Button Hold operations. Push the stick left to toggle the audio chirp mode.
The indicator light turns red, then fades out, and one chirp is heard indicating the chirps are disabled. The
indicator light turns red, then fades out, and two chirps are heard when audio chirps are enabled. After
selection of the chirp mode, the light turns green again indicating the Uno is in Program Mode 2.
Toggle between
4-way Button Mode
and
8-way Button Mode
while in Program Mode 2 by pushing the
stick right. In 4-way Button Mode, only buttons 1 through 4 are enabled. In 8-way Button Mode, buttons 1
through 8 are enabled. Push the stick right to toggle between these modes. The indicator turns red, then
fades out and one chirp is heard when switching to 4-way Button Mode. The indicator turns red, then fades
out and two chirps are heard when switching to 8-way Button Mode. After selection of the 4- and 8-way
Modes, the light turns green again indicating the Uno is in Program Mode 2. Any button holds are released.
Exit Program Mode 2 by pushing the joystick inward. The indicator turns red, two chirps are heard, and the
Uno is now in Program Mode 1.
