Grounding Instructions
Clean and Care Guide
When performing any maintenance inside, outside or around your reptile habitat always ensure that your basking
heater is in the off position and unplugged for at least 15 minutes prior to beginning any maintenance. If the
maintenance requires that you detach the basking heater from either the screen top or frame, never place the
basking heater on any surface unless it:
• Has cooled for at least 15 minutes and is unplugged in the off position.
Failure to do this may cause damage to surfaces touched by the bottom of the basking heater. It is also important
to never touch the underside of the basking heater while it is plugged in and/or in either the Hi or Lo setting.
THE BOTTOM IS EXTREMELY HOT AND WILL BURN SKIN.
Always use caution when cleaning the basking
heater or any surface in direct or indirect contact with the basking heater. Using the basking heater in any way
not intended by the manufacturer or in any way other than in these instructions could cause damage to your
home and your person. Only clean plastic surfaces with a soft damp cloth and while it is unplugged and has
cooled for at least 15 minutes.
SAVE THESE INSTRUCTIONS
Summary of Contents for ReptoHeat
Page 1: ...WELCOME...
