DIN806BB
2-2
Tetra Pak
Hoyer
2.1 Declaration of conformity
This machine has been manufactured in accordance
with international standards and hygiene and sanitary
legislation applicable to food processing machinery.
In the Declaration of Conformity supplied with the
machine, Tetra Pak Hoyer specifically certifies that
•
The illustrations and drawings of the machine
are intended for general reference use only, and
are not necessarily accurate in every detail;
•
The machine dimensions and specifications given
in this Manual are not binding and may be
changed without prior notice;
•
The drawings and all other documents supplied
with this machine remain the property of Tetra
Pak Hoyer and must not be passed on to third
parties without the written permission of Tetra
Pak Hoyer.
•
The manual includes instructions for all
accessories mounted on the standard machine.
•
This machine is covered by a warranty as
laid down in the purchase contract. Any
repair work not authorised by Tetra Pak
Hoyer carried out during the warranty
period will automatically invalidate the
warranty.
2.2 Preliminary comments
2.3 General safety rules
•
THESE SAFETY RULES HAVE BEEN
DRAWN UP IN YOUR INTEREST. Strict
observance will reduce the risk of injury to
yourself or to others.
•
DO NOT attempt to move, install or operate
the machine before reading and assimilating the
contents of this manual. Ask your superior in
case of doubt.
•
Make sure that all guards and safety covers are
in position BEFORE starting the machine.
•
NEVER leave tools, mechanical parts or other
foreign material on or inside the machine.
•
In the event of a malfunction, press the
emergency stop button.
•
NEVER PUT YOUR HANDS INSIDE THE
MACHINE WHEN IT IS IN OPERATION.
•
Be very careful even when the general switch is
set to “OFF”, because there is still voltage in
the power supply cables.
•
Shut off the compressed air supply before
disconnecting any pneumatic component.
•
BEFORE starting up production again after
maintenance or repair work, make sure that all
guards and protective covers have been replaced
correctly.
•
Proceed with caution at all times. Remember
that you are responsible for your own safety and
for that of your colleagues.
•
Make sure that applicable regulations are
observed when moving or lifting the machine.
Ι
the HOYER DINO C machine is designed and
manufactured in accordance with the provisions of
Directive 89/392/EC (Machinery Directive) and with
above-mentioned standards.
RETURN TO PM
