DIN806BE
5-4
Tetra Pak
Hoyer
•
Replace the pick-up gripper holder support
(Pos. 1, Fig. 5.4).
•
Replace the release gripper holder support
(Pos. 3, Fig. 5.4).
5.1.3 Ball cone and wafer cup products
•
Replace the rollers (Pos. 2, Fig. 5.4).
•
Deactivate the roller opening cylinders.
•
Check that the bypass cylinders are functioning
correctly.
3
1
2
Fig. 5.4
•
Replace the pick-up gripper holder support
(Pos. 1, Fig. 5.5).
•
Position the smooth belt for products without
sticks (Pos. 2, Fig. 5.5) in the correct position
on top of the pick-up machine.
•
Connect the smooth belt (Pos. 2, Fig. 5.5)
to the pick-up machine control panel.
•
When the smooth belt is in place, a safety
switch must be turned on which will disable
roller movement and enable a working
programme which causes the pick-up arm
to rotate and release products onto the
smooth belt.
5.1.4 Products without sticks
2
1
Fig. 5.5
RETURN TO PM
