6
7
If either of the messages below are displayed on your Case
Remote App, set up your WiFi connection and press the Refresh
button to connect your camera to your Case Air.
FIRMWARE UPDATE
If a firmware update for the Case Remote App is needed, you
will see the Attention screen. MAKE SURE the Case Air bat-
tery and the battery on the device you are connected to is fully
charged prior to pressing Confirm.
DO NOT turn off the Case Air or Case Remote App during the
update process as this may damage the hardware and render
the Case Air unrepairable. The firmware update process will take
approximately 3 minutes.
After the firmware update has completed, exit the Case Remote
app, ensure your device is connected to the Case Remote WiFi,
then restart the Case Remote App.
CASE REMOTE APP
Camera information
Refresh connection
