TESY IRH20RC WG, Usage And Storage Instructions

Page: 8 / 80

8
Usage and Storage Instructions
EN
WALL MOUNTING
1.
Lock the U shape wall bracket on the wall use by
Screws 4pcs M5x40 and Screw Socket.
2.
Fix the heater with the U shape bracket and lock
heater tightly use by the two side knob.
This unit is only suitable for wall mounting use,
forbidden to mount on the roof.
Correct Assemble Wrong Assemble
Only use the halogen heater on a firm solid vertical wall
where the Mounting Bar is in contact with the wall.
An optional accessory for the appliance –
non-assisted standing aluminum support AS01
can be purchased
Fix the heater with stand AS01 that provided by using
the 4pcs of M6*10mm Screws and knobs tightly.
IMPORTANT SAFETY PRECAUTIONS
•
Mount the heater outside or in a large open area
and well away from any obstructions such as
branches or where the heater is near any objects
that can be affected by heat, such as furniture,
curtains or other inflammable objects (minimum
distance 1 meter).
•
Do not use near bath tubs, wash areas or swimming
pools.
•
Do not use in unventilated areas
•
Do not use where gas, petrol, paint or other
inflammable goods are stored.
•
Do not push any items through, obstruct or cover
the grill of the heater head.
•
Do not position immediately above or below an
electrical socket.
•
Do not move when connected to an electrical
supply and always wait for the patio heater to cool
down before storing away.
•
Do not touch the heater head when in use.
•
Do not leave turned on and unattended especially
when children and or animals are in the vicinity.
•
The indication of the different positions of switches
shall be visible from a distance of 1M.
•
The Marking concerning covering shall be visible
after the heater has been installed. It shall not be
placed on the back of heaters.
•
The unit must be placed with the clearance of
180cm to the floor and 30cm to the ceiling.
•
The unit must be correctly installed according to
the instructions. Make sure the head is at least 1.8m
from the floor.