TESY HL-274W PTC, Usage And Storage Instructions

Page: 6 / 72

6
Usage and Storage Instructions
EN
Setting temperature – ambient temperature>=2°C, the
machine will wake up and resume to heating.
If you want to cancel the setting temperature, press
, key to choose the heating I or II, the product will work
without setting temperature. While the display
will
go off, and will show “--”. After continuous heating for
12hours, the cool fan will work for 30seconds and enter
into standby mode.
Set weekly program (ONLY by remote control)
After complete setting of current TIME/DAY, below are
the steps to set weekly program:
1. Press , the product enter into working status.
2. Press , the display shows ”P“, it enter into weekly
program setting
C I
II
P
3.
Press , the display shows d1~d7, set to working
day (Monday-Sunday: d1~d7). Such as set Monday
C I
II
P
Note: In order to distinguish between setting current
day & working day:
Current day - Monday-Sunday: d1~d7
Working day - Monday-Sunday: d1~d7
4. Press , the display shows P1~P6 (for each day, it
can be set maximum 6 time periods).Such as setting
P1:
C I
II
P
5.
Press , the display shows 00”as default. Press ,
continuously to set the turn-on time. Such as set the
turn-on time 7:00am (As figure );
C I
II
P
6. Press , the display shows the previous step turn-
off time by default. Press , continuously to set
the turn-off time. Such as set the shutdown time at
13:00pm:
C I
II
P
7. Press / , to setting the target temperature
(Temperature range 10-49°C);
8. Repeat steps 2-7 above, you can set the whole
weekly program. Then press , to confirmed;
9. To cancel the weekly function, press the , agian,
the light „P“ will go off. The weekly program is off.
The product will revert to the previous function
working status.
Note:
- After the above setting are completed and P program is
working, press / / / , to check the setting time of
each day and time periods,
- Press / , set working temperature under different
time periods.
- The turn-on time periods 00~24hours, cannot set to
minutes;
-The“TIME/OFF”can not be less than“TIME/ON”;
-When the“TIME/ON” is the same as“TIME/OFF”, the time
period enter into standby mode;
Set open-window detection (ONLY by remote
control):
1. Press , the product enter into working status.
Heating for a moment untill stable.