TESY CN205EASLFRWB, Usage And Storage Instructions, Page: 4 / 96

4
Usage and Storage Instructions
EN
•
At initial operation of the appliance and when the
appliance has not been used for a long time, it is possible
some odour or smoke to be emitted. These emissions will
disappear after a short period of appliance operation.
Moving the appliance:
If it is necessary to move the appliance, turn it off by
the major switch, unplug the power cord and move it with
your both hands to its new place, having ensured it has
cooled off. Moving hot appliances may lead to undesired
consequences to the user such as burning one’s skin or
inflammable materials getting on the appliance.
Wall Installation
•
Choose a suitable place so that furniture and other
objects not to obstruct proper convection of the
appliance;
•
Keep the minimum distances as prescribed on fig. 4
- Minimum 60 cm away from the ceiling;
- Minimum 30 сm away from the floor;
- Minimum 30 сm away from a wall or another
object on the left and right side of the panel
heater.
•
Installation and fixation of the panel heater(fig. 5)
- Install the – shaped wall support bars to
the back panel by means of the screws included
in the package
- Measure the distance between the two centers
of the two upper horizontal openings of the
support bars;
- Drill openings into the wall at the selected place
(openings should correspond to the measured
distance between the support bars centers), put
the dowels into the drilled openings and wind
the screws;
- Hang the panel heater on the wall and make sure
that all minimum safety distances have been kept
(according to fig. 4) and it has been securely fixed
to the wall. Then you can operate the panel heater.
OPERATION OF THE APPLIANCE
1.
Getting Started
•
Connect the appliance to a safe power socket;
•
Turn on the side mechanical switch - temperature
display of the screen and time (00:00) lighting up,
the product entering standby state
•
Press button - the screen is displaying
environment temperature (default working
temperature is 35°C) display time (00:00), anti frost
function icon
, and day mode icon at that
time, while other icons are not displayed
The anti-freezing mode works only in the standby
state and after timing, while the icon has been
shining all the time.
•
At this time the heater enters the day mode standby
state.
•
Day mode and week mode selection switch:
when day mode is in the scintillation state, touch
or to switch, and then touch to confirm.
If you want to switch on day mode and week mode
under working conditions, but day mode or
week mode icon do not flicker, you need to long press the
mode button first to wake up and touch or to
switch in the scintillation state of the icon.
2.
Daily mode setting
Touch (the day mode icon stops flickering), in order
to choose one of the following functions. The selected mode
icon will light up while the others don’t.
-
Anti-freezing mode
– the applience
will be heated only when the environment
temperature is below 5°C and stop heating
when the temperature rises to 7°C.
The icon is displayed when heating and the icon
is extinguished when the heating is stopped.