manualshive.com logo in svg

Tesvor M1, User Manual

Share
Download
Tesvor M1 User Manual Download Page 15

12

Set Time and Scheduled Cleaning

Note:

  

Make sure the time is set correctly to your local time before setting a 

scheduled cleaning.

1. Make sure the main power switch on the bottom of the M1 is turned on.

2. Press         on the remote control. The time will blink on the display.

3. Press              to set the “hour” and “minute”.

    Note: Make sure AM/PM is set correctly.

4. Press        to save the setting. 

You can schedule the M1 to start cleaning at a specified time. To cancel a 
previously scheduled cleaning session, press and hold       for 3 seconds.

Note:

 

Before setting a scheduled cleaning, make sure the time has been set 

correctly to your local time; refer to the previous section “Set Time” for how to set 

the time.

1. Make sure the main power switch on the bottom of the M1 is turned on.
2. Press       on the remote control.       will blink on the display.
3. Press               to set the “hour” and “minute”.
    Note: Make sure AM/PM is set correctly.
4. Press       to save the setting.

Set Time

Set a Scheduled Cleaning

Summary of Contents for M1
























Reviews:

No comments

Brands by name

Popular brands

Load more brands