2
CAUTION
1. FUNCTION
TECHNICAL DATA
Read the following instructions carefully before using the
pressure regulator, and keep them for future reference.
The instructions provide all the information necessary
for correct use of the instrument, to avoid damage and
danger. Tesuco
®
/OxyTurbo is not responsible for any
damage occurring due to incorrect use of the instrument,
or to modifications made to it.
The function of the pressure regulator is to reduce and stabilize the pressure of a gas; the
regulator changes the pressure at which the gas is kept in the cylinder into the pressure
needed to use for the application.
The pressure regulator has been designed so as to be used only and exclusively with the
type of gas and at the pressures which are shown by the marking.
To try and use the pressure regulator with types of gases and pressures other than those
indicated can be dangerous.
1.
Cylinder valve
2.
Inlet connection "O" ring (seal)
3.
Inlet connection (nut & stem)
4.
High pressure gauge
5.
Low pressure gauge
6.
Pressure adjusting knob
7.
Outlet connection
8.
Adaptor 1/4 - 5/16
9.
Relief valve
10.
Bonnet
11.
Body
12.
Gauge protectors
13.
Markings
PARTS LIST
(See page 7)
P1 = Inlet Pressure P2 = Outlet Pressure Q1= Maximum Delivery Flow Rate
Gas
N2
Colour
Blue
ID
N
P1 kPa
30,000
K-Class
-
P2 kPa
6,000
Q1 m³/h
50
Nitrogen 6000
