Important safety information
5
Warnings in this manual
These instructions include warnings against specified actions that in-
volve the risk of injury or property damage. Warnings are structured
as follows:
Description of the type or source of danger
Description of the consequences of non-compliance
Hazard prevention indications. Compliance with these hazard pre-
vention measures is imperative.
The signal word "
RISK
" refers to a significant danger that represents
a direct threat and will definitely result in severe injuries or even be
fatal if not avoided.
The signal word “
WARNING
" refers to a possible danger that may re-
sult in severe injuries or even be fatal if not avoided.
The signal word "
CAUTION
" refers to a potentially dangerous situa-
tion that could result in minor to moderate injuries or property dam-
age if not avoided.
The signal word "
NOTE
" refers to important pieces of information. If
this information is not heeded, it may adversely affect operational
procedures.
Additional documentation
The Testomat
®
Modul CL is a system component. Accordingly, you
should also observe the system documentation of the system manu-
facturer.
Special attention is required at this point
General Information
•
During assembly and commissioning, observe the specific national
and local requirements.
•
Observe the accident prevention and conservation requirements in
the country of use and at the installation site.
•
Make no changes or modifications to the device that go beyond the
scope of use specified in these instructions. Doing so will void the
warranty.
Requirements for the installation site
Ensure that the following conditions are met at the installation site:
•
Use the device in indoor locations only.
•
The ambient temperature is between 10 and 40 °C.
•
The installation site is at altitudes under 2000 m.
•
The maximum relative humidity is 80 % at temperatures of up to
31 °C (linear declining up to 50 % relative humidity at 40 °C).
SIGNAL WORD!
WARNING
!
CAUTION
!
DANGER
!
NOTE
WARNING
!
