The Service Monitor program
27
The Service Monitor program
The Testomat
®
Modul CL settings can be displayed and changed with
the Service Monitor program (for operating systems from Windows 7
onwards). The program is stored on the SD card of the device.
To work with the Service Monitor, the SD card from the device must
be inserted into the computer (see also
page 24) or the device must be connected to the computer that the
program is running on, via the USB interface (see also
on page 22).
Installing the Service Monitor
The Service Monitor program consists of:
•
the “TestomatModul.exe” file and
•
the “TestomatModul_CL.cfg” configuration file.
Copy both files to the target computer.
Start the “TestomatModul.exe” file.
When USB communication is established, select “Port” under the
“USB” field and press the “Open” button.
Select the appropriate device under “Device selection”.
Load the firmware version into the device under
“Read”.
Configure your settings.