2 Safety and the environment
6
Represen-
tation
Explanation
- ...
Result of an action.
Menu
Elements of the instrument, the instrument displays
or the program interface.
[OK]
Control keys of the instrument or buttons of the
program interface.
... | ...
Functions/paths within a menu.
“...” Example
entries
2.2.
Ensure safety
> Only operate the product properly, for its intended purpose and
within the parameters specified in the technical data. Do not
use any force.
> Do not operate the instrument if there are signs of damage at
the housing, mains unit or feed lines.
During operation, the imager must not be pointed at the sun or
other intensive sources of radiation (e.g. objects with temperatures
greater than 550°C/1022°F, if using the high-temperature
measurement range 1400°C/2552°F). This can lead to serious
damage to the detector. The manufacturer assumes no liability for
any such damage to the microbolometer detector.
> The objects to be measured or the measurement environment
may also pose risks: Note the safety regulations valid in your
area when performing the measurements.
> Do not store the product together with solvents. Do not use any
desiccants.
> Carry out only the maintenance and repair work on this
instrument that is described in the documentation. Follow the
prescribed steps exactly. Use only original spare parts from
Testo.
> Improper use of rechargeable batteries can lead to destruction
or injuries by means of current surges, fire or escaping
chemicals. The following instructions must be observed to avoid
such hazards:
• Only use in accordance with the directions in the instruction
manual.
• Do not short, take apart or modify.
• Do not expose to heavy impacts, water, fire or temperatures
above 60 °C.
www.
GlobalTestSupply
.com
Quality Testo Products Online at:
