3 Let the condensate run out into a sink (
➁
).
4 Dab off any remaining drops on the condensate
outlet with a cloth.
5 Close the condensate outlet.
The condensate outlet must be completely
closed (marking), as otherwise measuring errors
could be caused by infiltrated air.
Key functions
Switching the measuring instrument on / off: .
Back, cancel function: .
Save data to the clipboard:
➝
(only available when saving to clip-
board is possible).
Saving data
➝
(only available when saving to clipboard is
possible). Data in the clipboard will also be saved.
Printing data:
(only available when printing is possible, the printer to be used must
be enabled). Data in the clipboard will also be printed out.
Calling up the function: Select function:
,
and confirm selection:
.
Enter value
List field:
1 Select value (numerical value, unit):
,
and set:
,
.
2 Confirm input:
.
Input editor:
1 Select value (character):
,
,
,
.
2 Accept value:
.
3 Save values:
.
Enter smoke pump no. / smoke numbers / oil derivative / heat carrier temperature
1
➝
Measurements
➝
➝
Smoke number / WTT
➝
.
Steps 2 to 4 are only valid if the chosen fuel is an oil.
2 Smoke pump number
➝
➝
Enter pump number
➝
.
3 Smoke number 1
➝
➝
Enter value
➝
.
4 Perform step 3 for further smoke numbers and the oil derivative accordingly.
5 Heat carrier temperature
➝
➝
Enter value
➝
.
6 Save values:
➝
.
Save
Options
Edit
Edit
Edit
OK
OK
OK
OK
OK
Next
OK
OK
OK
Save
Options
Clipboard
Options
➁
