6
Performing the measurement
24
5.1
- If necessary, Select
X
and press
OK
to go back to the mode menu.
6
- Select
✔
and press
OK
.
Manual scaling is activated.
M
is displayed bottom right.
Setting ScaleAssist
The ScaleAssist function calculates a display-neutral scale depending on the
inside and outside temperature. This scale graduation can be used to detect
structural defects in buildings.
1
- Select the
Scale
function.
2
- Press
OK
.
3
- In the mode menu, move the
joystick
up/down until
ScaleAssist
is
selected.
4
- Move the
joystick
to the right, select
Temp. In
(indoor temperature).
- Move the
joystick
up/down to set the value.
5
- Move the
joystick
to the right, select
Temp. Out
(outdoor
temperature).
- Move the
joystick
up/down to set the value.
5
- If necessary,
Select
X
, press
OK
to
go back to the mode menu
.
7
- Activate
ScaleAssist
: Select
✔
and press
OK
.
Manual scaling is activated.
S
is displayed at bottom right.
6.5 Setting emissivity and reflected
temperature
This function is only available if the
Image type
is set to infrared image.
You can choose between user-defined emissivity and 8 materials with
permanently set emissivity. The reflected temperature (RTC) can be set
individually.
Summary of Contents for 0560 8681
Page 2: ......
