TESTAMED GlucoCheck Advance, Owner'S Manual

Page: 12 / 49

En
7
Setting the Measurement Unit
SETTING THE METER
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
Press and release or to select the
desired measurement unit---mg/dl or
mmol/l.
Press
SET .
With the measurement unit flashing,
press or to select „YES“ or „no“.
Press
SET to confirm the measurement
unit.
Start with the meter off (no test strip
inserted). Press
SET for 5 seconds to
enter the unit setting mode.