4.3
Set-up Menu
Press the SETUP key to enter set the basic machine parameters. Press the left and
right arrow keys (< and >) to scroll through the options for any particular setting. Press
the up and down arrow keys to select a different function to set. The diagram below
illustrates the use of the set-up menus:
Press the SETUP key to edit operational settings
Use
<
and
>
(left/right arrow keys)
to select an option - in this case the
speed.
Press
(Enter key) to confirm &
return to main screen
Use
and
(up/down arrow keys)
to select a different function
– in this case variable
speed
Enter a number and press
(Enter key)
and
keys to select a different function
<
or
>
to select
<
or
>
to select
<
or
>
to select
(for use with DSU)
CBR (BS):
1.00mm/min
CBR (ASTM):
1.27mm/min
UU 38mm:
1.42mm/min
UU 100mm:
4.00mm/min
Marshall (BS):
50.0mm/min
Standard Speeds
Enter Non-Standard Speed: ……..
Variable Speed
1.
mm/min
2.
in/min
Speed Units
In all cases press
Enter key
(
)
to
confirm your
selection, or ESC to
return to the main
screen without making
any changes
Enter Pass Code
Diagnostics
< or > to Change 1-50
LCD Contrast
< or > to Change
Serial Baud Rate
(For Service use)
Original Instructions
8
Summary of Contents for TT AUT-MARSHALL-CBR
Page 17: ...DIRECTIVE ON WASTE ELECTRICAL ELECTRONIC EQUIPMENT WEEE ...
Page 18: ......
