Page 2 of 5
Method #1 Installation:
This method should only be used when all phones are within close proximity of each
other. Up to five telephones can be connected with this method. It is okay to use
telephone extension cables if needed.
1- Disconnect all of your telephones.
2- Using a supplied telephone cord, connect one end to a wall telephone jack, Lines 1&2.
Connect the other end of the cord to the CK-2- "To Phone Lines", "Lines 1&2".
3- Using a supplied telephone cord, connect one end to a wall telephone jack, Lines 3&4.
Connect the other end of the cord to the CK-2- "To Phone Lines", "Lines 3&4".
4- Connect a telephone cord from each line 1&2 jack on each telephone, to a CK-2 jack
that is labeled "Phone 1&2". Order does not matter.
Telephone Jacks
1&2
1&2
1&2
1&2
1&2
3&4
3&4
3&4
3&4
3&4
Method #1
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
